Load data for .219 Donaldson Wasp + .224 | 50gr | Speer MHP

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Speer MHP
Manufacturer SKU:	1031
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.690" \| 17.5mm
Caliber:	.219 Donaldson Wasp load data
Case Length (l3):	1.810" \| 46.0mm
Cartridge Length (C.O.L.):	2.177" \| 55.3mm
Seated Depth:	0.323" \| 8.2mm
Shank Seated Depth:	0.323" \| 8.2mm
Case Capacity:	35.1 Grains of Water \| 2.28 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40988 psi \| 2826 bar
LID:	LID_B6057_C105
Last updated:	2025-02-02

Load data for 46 loads in caliber .219 Donaldson Wasp with .224 | 50gr | Speer MHP bullet and 23 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	87%	36680	89%	**71	98%
Accurate 2495	<<locked>>	93%	36883	90%	**56	97%
[Accurate 2520]*	<<locked>>	90%	36013	88%	**87	93%
[Accurate 4064]*	<<locked>>	96%	34040	83%	**58	94%
Alliant AR-Comp 👍	<<locked>>	91%	36796	90%	**59	99%
Alliant Reloder-10x	<<locked>>	83%	36492	89%	**81	98%
Hodgdon H322	<<locked>>	87%	36318	89%	**91	95%
Hodgdon TrailBoss	<<locked>>	97%	30414	74%	**16	100%
IMR 3031	<<locked>>	94%	35810	87%	**33	96%
[Lovex D073.6]*	<<locked>>	92%	36013	88%	**87	93%
[Norma 202]*	<<locked>>	91%	35752	87%	**61	94%
ReloadSwiss RS 14	<<locked>>	96%	29994	73%	**59	100%
[ReloadSwiss RS 40]*	<<locked>>	84%	35911	88%	**38	92%
[Rottweil R 901]*	<<locked>>	88%	36216	88%	**48	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	36564	89%	**95	94%
SNPE Vectan Tubal 5000	<<locked>>	95%	36274	88%	**95	95%
[Shooters World Match Rifle]*	<<locked>>	92%	36013	88%	**87	93%
Somchem S335	<<locked>>	90%	36419	89%	**15	95%
Vihtavuori N130	<<locked>>	85%	36289	89%	**12	98%
Vihtavuori N133	<<locked>>	91%	35969	88%	**05	97%
Vihtavuori N135	<<locked>>	96%	31473	77%	**63	95%
Vihtavuori N140	<<locked>>	94%	36840	90%	**64	95%
[Vihtavuori N540]*	<<locked>>	93%	36579	89%	**81	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	30472	74%	**00	95%
[Accurate 2495]*	<<locked>>	81%	23786	58%	**56	91%
[Accurate 2520]*	<<locked>>	86%	30864	75%	**53	90%
[Accurate 4064]*	<<locked>>	91%	28152	69%	**87	91%
Alliant AR-Comp	<<locked>>	81%	26426	64%	**38	96%
Alliant Reloder-10x	<<locked>>	81%	33779	82%	**18	97%
[Hodgdon H322]*	<<locked>>	81%	30211	74%	**13	92%
Hodgdon TrailBoss	<<locked>>	81%	23772	58%	**42	100%
[IMR 3031]*	<<locked>>	84%	25802	63%	**12	90%
[Lovex D073.6]*	<<locked>>	88%	30864	75%	**53	90%
[Norma 202]*	<<locked>>	84%	28935	71%	**71	90%
ReloadSwiss RS 14	<<locked>>	81%	23540	57%	**85	100%
[ReloadSwiss RS 40]*	<<locked>>	81%	32271	79%	**40	90%
[Rottweil R 901]*	<<locked>>	82%	30255	74%	**67	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	82%	29399	72%	**95	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	87%	27325	67%	**33	91%
[Shooters World Match Rifle]*	<<locked>>	88%	30864	75%	**53	90%
[Somchem S335]*	<<locked>>	81%	27557	67%	**59	91%
Vihtavuori N130	<<locked>>	81%	31546	77%	**84	96%
[Vihtavuori N133]*	<<locked>>	81%	25991	63%	**13	92%
[Vihtavuori N135]*	<<locked>>	88%	24366	59%	**17	90%
[Vihtavuori N140]*	<<locked>>	85%	27876	68%	**08	90%
[Vihtavuori N540]*	<<locked>>	87%	29544	72%	**71	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.